|
  Introduction
The component of carbon molecular sieve (CMS) is carbon. CMS takes the appearance of cylindrical black solid, contains countless 4 angstrom fine pores, it can be used to separate air into nitrogen and oxygen .In industry, CMS can concentrate nitrogen from air with PSA systems. Our CMS products have the character of large nitrogen yield capacity; high nitrogen recovery. It can meet the requirement of all types of PSA nitrogen systems.
The carbon molecular sieve is widely applied in petroleum chemical industry, the heat treatment of metal, the electronic manufacture and food preservation indus tries.
 Physical properties
 Cylindrical Diameter: 1.6mm
 Bulk Density: 640-660g/l
 Crushing Strength: 100N/p Min
 Dust level: 100PPM Max
Type |
Adsorbent pressure
(MPa) |
Nitrogen concentration
(N2%) |
Nitrogen quantity
(NM3/h.t) |
N2/Air
(%) |
CMS-160 |
0.8 |
99.99
99.9
99.5
99.0
98.0 |
40
100
160
200
290 |
15
23
34
38
43 |
CMS-185 |
0.8 |
99.99
99.9
99.5
99.0
98.0 |
60
120
185
230
310 |
20
26
36
41
46 |
CMS-200 |
0.8 |
99.99
99.9
99.5
99.0
98.0 |
70
140
200
260
330 |
21
27
36
41
48 |
CMS-220 |
0.8 |
99.99
99.9
99.5
99.0
98.0 |
90
160
220
290
360 |
25
34
43
48
54 |
CMS-240 |
0.8 |
99.99
99.9
99.5
99.0
98.0 |
100
175
240
300
370 |
26
35
44
49
55 |
CMS-260 |
0.8 |
99.99
99.9
99.5
99.0
98.0 |
110
190
260
310
380 |
27
36
45
50
56 |
 Service scope
The following merits of service:
 High ratio performence&price, reducing investment cost and operation cost.
 Large hardness, little ash, long service life, uniform particles which protests air current impact.
 Stable quality: Testing strictly according to 100% standard of production and ex-factory testing management.
 The resin uses in producing the high pure nitrogen with good performance which substitutes the similar import products.
 Three guarantees
|
